Assessment of Regional Bone Density in Fractured Vertebrae Using Quantitative Computed Tomography
Hany A G Soliman1, Jean-Marc Mac-Thiong2, Annie Levasseur3
1Department of Surgery, University of Montreal, Montreal, QC, Canada.; Research Center, Hôpital du Sacré-Coeur de Montréal, Montreal, QC, Canada.; Research Center, CHU Sainte-Justine, Montreal, QC, Canada.; Al Zahraa Univeristy Hospital, Al Azhar University, Cairo, Egypt.
Study Design:
Cohort study.
Purpose:
The aim of this study is to propose and evaluate a new technique to assess bone mineral density of fractured vertebrae using quantitative computed tomography (QCT).
Overview Of Literature:
There is no available technique to estimate bone mineral density (BMD) at the fractured vertebra because of the alterations in bony structures at the fracture site.
Methods:
Forty patients with isolated fracture from T10 to L2 were analyzed from the vertebrae above and below the fracture level. Apparent density (AD) was measured based on the relationship between QCT images attenuation coefficients and the density of calibration objects. AD of 8 independent regions of interest (ROI) within the vertebral body and 2 ROI within the pedicles of vertebrae above and below the fractured vertebra were measured. At the level of the fractured vertebra, AD was measured at the pedicles, which are typically intact. AD of the fractured vertebral body was linearly interpolated, based on the assumption that AD at the fractured vertebra is equivalent to the average AD measured in vertebrae adjacent to the fracture. Estimated and measured AD of the pedicles at the fractured level were compared to verify our assumption of linear interpolation from adjacent vertebrae.
Results:
The difference between the measured and the interpolated density of the pedicles at the fractured vertebra was 0.006 and 0.003 g/cm3 for right and left pedicle respectively. The highest mean AD located at the pedicles and the lowest mean AD was found at the anterior ROI of the vertebral body. Significant negative correlation exist between age and AD of ROI in the vertebral body.
Conclusions:
This study suggests that the proposed technique is adequate to estimate the AD of a fractured vertebra from the density of adjacent vertebrae.
Related Concept Videos
01:10Computed Tomography
The technique was invented in the 1970s and is based on the principle that as X-rays pass through the body, they are absorbed or reflected at different levels. In the technique, a patient lies on a motorized platform while a computerized axial tomography (CAT) scanner rotates...
01:27Imaging Studies III: Computed Tomography