Plantar Static Pressure Distribution in Normal Feet Using Cotton Socks with Different Structures

The major goal of investigating plantar pressure in patients with pain or those at risk for skin injury is to reduce pressure under prominent metatarsal heads, especially the first and second metatarsals. In research, the insole is used to reduce plantar pressure by increasing the contact area in the midfoot region, which, in turn, induces an uncomfortable feeling near the arch during walking. It is deduced that sock structure can redistribute plantar pressure distribution.

Seven sock types with seven structures (plain, single cross tuck, mock rib inlay, cross miss, mock rib, double cross tuck, and double cross miss) for the sole area were produced. A plantar pressure measurement device was used to measure plantar static pressure in ten participants. The barefoot plantar pressure distribution was compared with the plantar pressure distribution with socks.

In the seven sock samples, the mean plantar pressure of the cross miss and mock rib structures at high plantar pressure zones (toe and first through fourth metatarsal bone regions) were decreased, and, as a result, the pressure shifted to relatively low pressure zones (fifth metatarsal bone and midfoot regions).

These results indicate that wearing socks with cross miss and mock rib structures will reduce mean plantar pressure values compared with the barefoot condition in high plantar pressure zones. In general, the results suggest that mean plantar pressure is redistributed from high to low plantar pressure zones.