Related Experiment Video
Updated: Aug 15, 2026

Method to Produce Durable Pellets at Lower Energy Consumption Using High Moisture Corn Stover and a Corn Starch Binder in a Flat Die Pellet Mill
Published on: June 15, 2016
Temporal Trend in Wood Dust Exposure During the Production of Wood Pellets
Kåre Eriksson1, Ing-Liss Bryngelsson2, Katja Hagström2
1Department of Occupational and Environmental Medicine, Umeå University, Umeå SE90187, Sweden.
Objective:
Wood dust data collected in the production of wood pellets during 2001 to 2013 were evaluated to study a temporal trend in inhalation exposure.
Methods:
A linear mixed effects model of natural ln-transformed data was used to express the relative annual difference in inhalation wood dust exposure.
Results:
There was an annual decrease of -20.5% of the geometric mean wood dust exposure during 2001 until 2013. The results were based on 617 inhalable dust samples collected at 14 different production units. The exposure to wood dust at the industrial premises investigated has decreased from a relatively high level of 6.4 mg m-3 in 2001 to 1.0 mg-3 in 2013. The Swedish Occupational Exposure Limit (SOEL) of 2 mg m-3 may still be exceeded.
Conclusion:
Analysis of the temporal trend in soft wood production units revealed declines in exposure of 20.5% per annum. It is important that precautions are taken to protect workers from a hazardous exposure to wood dust at the premises as the SOEL of 2 mg m-3 at some occasions is still exceeded. Additional measurements of wood dust exposure should be carried out on a regular basis in wood pellet production units in Sweden as well in other countries.
Related Concept Videos
Introduction to Wood
The structural integrity of the wood...
Seasoning of Wood
Achieving equilibrium moisture content is the goal of seasoning; this is the point where the wood's moisture content stabilizes to align with the moisture levels of the surrounding environment. Proper...
Wood Products
Glue-laminated wood, often referred to as glulam, combines multiple smaller pieces of dimensional lumber using adhesives to form a single, larger piece. Cross-laminated timber consists...

