Related Experiment Video
Updated: Jul 13, 2026
Fabrication of Ultra-thin Color Films with Highly Absorbing Media Using Oblique Angle Deposition
Published on: August 29, 2017
Modeling the dose dependence of the vis-absorption spectrum of EBT3 GafChromic™ films
Maarten B Callens1, Wouter Crijns2, Tom Depuydt2
1Wave Propagation and Signal Processing, KU Leuven - KULAK, Kortrijk, 8500, Belgium.
Purpose:
The aim of this work was to model the dose dependence of the darkening of GafChromic™ EBT3 films by combining the optical properties of the polydiacetylene polymer phases, and a modified version of the single-hit model, which will take the stick-like shape of the monomer microcrystals into account. Second, a comparison is made between the quantification of the film darkening by flatbed scanning and by UV-vis absorption spectroscopy.
Method:
GafChromicTM EBT3 films were irradiated with a 6 MV photon beam at dose levels between 0 and 50 Gy. The radiation-induced darkening of the films is quantified by a flatbed scanner, and by UV-vis absorption spectroscopy in the wavelength range of 220-750 nm. From the UV-vis absorption spectra, the contribution of each polymer phase to the absorbance was deduced. Next, the dose dependence of the polymer content is described by a modified single-hit model where the size distribution of polymerizable centers is approximated by way of the size distribution of the monomer microcrystals in the film.
Results:
The absorption properties of the film can be accurately quantified by UV-vis spectroscopy for dose levels between 0 and 10 Gy. Over 10 Gy, the absorption spectrum saturates due to the limited sensitivity of the spectrometer. The modified single-hit model was successful in describing the increasing polymer concentration with radiation dose, using a log-normal distribution for the length of the stick-like monomer microcrystals. The dose dependence of the polymer content, deduced from the UV-vis absorption spectrum, differs from that of the flatbed scanning method and is more sensitive to changes in dose.
Conclusion:
The dose dependence of the polymer concentration can be modeled by taking into account the distribution of active centers using the microstructure of the active layer for dose levels between 0 and 10 Gy. The dissimilar dose dependence of the polymer concentration and the absorbance must be accounted for when modeling darkening from the kinetics of the photopolymerization reaction.
