Related Experiment Video
Updated: Jul 28, 2026
An Efficient Method for Selective Desalination of Radioactive Iodine Anions by Using Gold Nanoparticles-Embedded Membrane Filter
Published on: July 13, 2018
Surface functionalized composite nanofibers for efficient removal of arsenic from aqueous solutions
Alaa Mohamed1, T A Osman2, M S Toprak3
1Department of Materials and Nano Physics, KTH-Royal Institute of Technology, SE 16440 Stockholm, Sweden; Egypt Nanotechnology Center, EGNC, Cairo University, 12613 Giza, Egypt; Production Engineering and Printing Technology Department, Akhbar El Yom Academy, 12655 Giza, Egypt.
Abstract:
A novel composites nanofiber was synthesized based on PAN-CNT/TiO2-NH2 nanofibers using electrospinning technique followed by chemical modification of TiO2 NPs. PAN-CNT/TiO2-NH2 nanofiber were characterized by XRD, FTIR, SEM, and TEM. The effects of various experimental parameters such as initial concentration, contact time, and solution pH on As removal were investigated. The maximum adsorption capacity at pH 2 for As(III) and As(V) is 251 mg/g and 249 mg/g, respectively, which is much higher than most of the reported adsorbents. The adsorption equilibrium reached within 20 and 60 min as the initial solution concentration increased from 10 to 100 mg/L, and the data fitted well using the linear and nonlinear pseudo first and second order model. Isotherm data fitted well to the linear and nonlinear Langmuir, Freundlich, and Redlich-Peterson isotherm adsorption model. Desorption results showed that the adsorption capacity can remain up to 70% after 5 times usage. This work provides a simple and an efficient method for removing arsenic from aqueous solution.
