Size-dependent magnetic tuning of lateral photovoltaic effect in nonmagnetic Si-based Schottky junctions

Related Experiment Video

Updated: Oct 21, 2026

Polycrystalline Silicon Thin-film Solar cells with Plasmonic-enhanced Light-trapping
09:32

Polycrystalline Silicon Thin-film Solar cells with Plasmonic-enhanced Light-trapping

Published on: July 2, 2012

Peiqi Zhou1, Zhikai Gan1, Xu Huang1

  • 1State Key Laboratory of Advanced Optical Communication Systems and Networks, School of Physics and Astronomy, and Key Laboratory of Thin Film and microfabrication of the Ministry of Education, Shanghai JiaoTong University, 800 Dongchuan Rd, Shanghai 200240, P. R. China.

Scientific Reports
|April 12, 2017
PubMed

More Related Videos

Developing High Performance GaP/Si Heterojunction Solar Cells10:31

Developing High Performance GaP/Si Heterojunction Solar Cells

Published on: November 16, 2018

Close-Space Sublimation-Deposited Ultra-Thin CdSeTe/CdTe Solar Cells for Enhanced Short-Circuit Current Density and Photoluminescence12:21

Close-Space Sublimation-Deposited Ultra-Thin CdSeTe/CdTe Solar Cells for Enhanced Short-Circuit Current Density and Photoluminescence

Published on: March 6, 2020

Related Concept Videos

P-N junction01:11

P-N junction

A p-n junction is formed when p-type and n-type semiconductor materials are joined together. At the interface of the p-n junction, holes from the p-side and electrons from the n-side begin to diffuse into the opposite sides due to the concentration gradient. This diffusion of carriers leads to a region around the junction where there are no free charge carriers, known as the depletion region. The charge density within the depletion region for the n-side and p-side can be described by the...
Metal-Semiconductor Junctions01:24

Metal-Semiconductor Junctions

The contact of metal and semiconductor can lead to the formation of a junction with either Schottky or Ohmic behavior.
Schottky Barriers
Schottky barriers arise when a metal with a work function (Φm) contacts a semiconductor with a different work function (Φs). Initially, electrons transfer until the Fermi levels of the metal and semiconductor align at equilibrium. For instance, if Φm > Φs, the semiconductor Fermi level is higher than the metal's before contact. The semiconductor's...
Biasing of Metal-Semiconductor Junctions01:27

Biasing of Metal-Semiconductor Junctions

Biasing metal-semiconductor junctions involves applying a voltage across the junction. Specifically, the metal is connected to a voltage source, while the semiconductor is grounded. This technique is essential for controlling the direction and magnitude of current flow in electronic devices, including diodes, transistors, and photovoltaic cells.
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...