Related Experiment Video
Updated: Jul 13, 2026

Design and Construction of an Urban Runoff Research Facility
Published on: August 8, 2014
Nature based solutions to mitigate soil sealing in urban areas: Results from a 4-year study comparing permeable,
1Department of Agrifood Production and Environmental Sciences, section Woody Plants - University of Florence, Italy; Department of Agricultural and Environmental Sciences - Production, Landscape, Agroenergy - University of Milan, Milan, Italy.
Abstract:
Soil sealing is one of the most pervasive forms of soil degradation that follows urbanization and, despite innovative pavements (i.e. pervious) are being installed in urban areas to mitigate it, there is little research on the effects of pervious pavements on soil water and carbon cycle and on the physiology of urban trees. The aim of this 4-year experiment was to assess the effects of three pavements, differing in permeability to water and gases, on some soil physical parameters, and on growth and physiology of newly planted Celtis australis and Fraxinus ornus. Treatments were: 1) impermeable pavement (asphalt on concrete sub-base); 2) permeable pavement (pavers on crushed rock sub-base); 3) porous design (porous pavement on crushed rock sub-base); 4) control (unpaved soil, kept free of weed by chemical control). Soil (temperature, moisture, oxygen content and CO2 efflux) and plant (above- and below-ground growth, leaf gas exchange, chlorophyll fluorescence, water relations) parameters were measured. All types of pavements altered the water cycle compared to unpaved soil plots, but this disturbance was less intense in porous pavements than in other soil cover types. Porous pavements allowed both higher infiltration and evaporation of water than both pavers and asphalt. Reduction of evaporative cooling from soil paved with permeable and impermeable pavements contributed to significant soil warming: at 20cm depth, soils under concrete pavers and asphalt were 4 and 5°C warmer than soil covered by porous pavements and unpaved soils, respectively. Thus, enhancing evaporation from paved soil by the use of porous pavements may contribute to mitigating urban heat islands. CO2 greatly accumulated under impermeable and permeable pavements, but not under porous pavements, which showed CO2 efflux rates similar to control. Soil oxygen slightly decreased only beneath asphalt. Growth of newly planted C. australis and F. ornus was little affected by pavement type. Tree transpiration rapidly depleted soil moisture compared to the not-planted scenario, but soil moisture did not fall below wilting point (particularly in the deeper soil layers, i.e. 40-50cm) in any treatment. While C. australis showed similar leaf gas exchange and water relations in all treatments, F. ornus showed a depression in CO2 assimilation and slight signs of stress of the photosynthetic apparatus when planted in soil covered with impermeable pavement. The effects of soil cover with different materials on tree growth and physiology were little, because newly planted trees have most of their roots still confined in the unpaved planting pit. Still, the reduction of soil sealing around the planting pit triggered the establishment of sensitive species such as ash. Further research is needed to assess the effects of different pavement types on established, larger trees.
More Related Videos
08:49Vegetated Treatment Systems for Removing Contaminants Associated with Surface Water Toxicity in Agriculture and Urban Runoff
Published on: May 15, 2017
07:12Façade-Level Monitoring of CO2 Variability under Urban Heat Island Conditions using Low-Cost Sensor Data Loggers
Published on: December 12, 2025
Related Concept Videos
Masonry Paving
Porosity and Absorption of Aggregate
When all pores in an aggregate are filled with water, the aggregate is considered saturated and surface-dry. If left in dry air, water will evaporate until the aggregate...
Waterproofing and Anti-Bacterial Admixtures in Concrete
Waterproofing admixtures render concrete hydrophobic,...
Design Example: Sustainability in Concrete Building
There are multiple approaches to achieve sustainability in a commercial concrete building. For instance, construct a concrete parking area under the building, utilizing pervious concrete paver blocks in open areas to facilitate rainwater collection through an underground cistern.
Permeability of Concrete
Design Example: Joints in Concrete Pavements
Contraction joints are typically formed by sawing a groove into the concrete shortly after it has hardened. This creates a weakened vertical plane, deliberately encouraging cracking at...