Related Experiment Video
Updated: Aug 18, 2026

Patterning via Optical Saturable Transitions - Fabrication and Characterization
Published on: December 11, 2014
Cr:ZnS saturable absorber passively Q-switched mode-locking Tm,Ho:LLF laser
Abstract:
We first report on a diode-end-pumped passively Q-switched mode-locking Tm,Ho:LLF laser at 2053 nm by using a Cr:ZnS saturable absorber. A stable Q-switched mode-locking pulse train with a nearly 100% modulation depth was achieved. The repetition frequency of the Q-switched pulse envelope increased from 0.5 to 12.3 kHz with increasing pump power from 1 to 4.36 W. The maximum average output power of 145 mW was obtained, and the width of the mode-locked pulse was estimated to be less than 682 ps with a 250 MHz repetition frequency within a Q-switched pulse envelope of about 700 ns.
More Related Videos
14:18Automation of Mode Locking in a Nonlinear Polarization Rotation Fiber Laser through Output Polarization Measurements
Published on: February 28, 2016
08:48Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy
Published on: November 22, 2019