Numerical study of one-dimensional compression of granular materials. II. Elastic moduli, stresses, and...

The elastic moduli of a transversely isotropic model granular material, made of slightly polydisperse elastic-frictional spherical beads, in equilibrium along a one-dimensional (oedometric) compression path, as described in the companion paper [M. H. Khalili et al., Phys. Rev. E 95, 032907 (2017)]10.1103/PhysRevE.95.032907, are investigated by numerical simulations. The relations of the five independent moduli to stresses, density, coordination number, fabric and force anisotropies are studied for different internal material states along the oedometric loading path. It is observed that elastic moduli, as in isotropic packs, are primarily determined by the coordination number, with anomalously small shear moduli in poorly coordinated systems, whatever their density. Such states also exhibit faster increasing moduli in compression, and larger off-diagonal moduli and Poisson ratios. Anisotropy affects the longitudinal moduli C_{11} in the axial direction and C_{22} in the transverse directions, and the shear modulus in the transverse plane C_{44}, more than the shear modulus in a plane containing the axial direction C_{55}. The results are compared to available experiments on anisotropic bead packs, revealing, despite likely differences in internal states, a very similar range of stiffness level (linked to coordination), and semiquantitative agreement as regards the influence of anisotropy. Effective medium theory (the Voigt approach) provides quite inaccurate predictions of the moduli. It also significantly underestimates ratios C_{11}/C_{22} (varying between 1 and 2.2) and C_{55}/C_{44} (varying from 1 to 1.6), which characterize elastic anisotropy, except in relatively weakly anisotropic states. The bulk modulus for isotropic compression and the compliance corresponding to stress increments proportional to the previous stress values are the only elastic coefficients to be correctly estimated by available predictive relations. We discuss the influences of fabric and force anisotropies onto elastic anisotropy, showing in particular that the former dominates in sample series that are directly assembled in anisotropic configurations and keep a roughly constant lateral to axial stress ratio under compression.