Related Experiment Video
Updated: Mar 3, 2026

High Speed Sub-GHz Spectrometer for Brillouin Scattering Analysis
Published on: December 22, 2015
Real-time broadband radio frequency spectrum analyzer based on parametric spectro-temporal analyzer (PASTA)
Abstract:
A real-time broadband radio frequency (RF) spectrum analyzer is proposed and experimentally demonstrated to rapidly measure the RF spectrum of broadband optical signal. Cross phase modulation in the highly-nonlinear fiber is used to convert the RF spectrum carried by the pump to the optical spectrum of the probe signal, then the optical spectrum is real-time analyzed with the parametric spectro-temporal analyzer (PASTA) technology. The system performances are investigated in detail, including bandwidth, resolution, frame rate, and dynamic range. It achieves large RF bandwidth of over 800 GHz, as well as 91-MHz frame rate without sacrificing the resolution. It is noted that 91-MHz frame rate is several orders of magnitude improvement over those previous reported all-optical RF spectrum analyzers. As a proof-of-concept demonstration, this real-time broadband RF spectrum analyzer successfully characterizes the ultra-short pulse trains with repetition rate of 160GHz, which is far beyond capability of the conventional electrical spectrum analyzer. It presents a new way to implement rapid and broadband RF spectrum measurement, and would be of great interests for some ultrafast scenarios, where the real-time RF spectrum analysis can be applied.
Related Concept Videos
Bandpass Sampling
A bandpass signal has a spectrum with a lower frequency limit, denoted as ω1, and an upper frequency limit, denoted as ω2....
Properties of Fourier Transform I
In radio broadcasting, multiple audio signals often need to be transmitted simultaneously. The Fourier...
NMR Spectrometers: Radiofrequency Pulses and Pulse Sequences
Aliasing
If the sampling frequency is below the Nyquist rate, these replicas overlap, preventing the original...
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
IR Spectrometers

