Calibration and parameter variation using a finite element model for death time estimation: The influence of the...

The most established method for temperature based death time estimation is based on an empirical double exponential model. New physically based approaches using numerical simulation techniques are subject of current research. A major advantage of such models is the possibility to incorporate non-standard boundary conditions. The aim of this study was to investigate the influence of the substrate on the cooling rate of a body in the early postmortem phase. A finite element model was used for parameter variation in terms of different substrate materials. Simulation results showed a considerable influence of substrate material on the postmortem cooling rate of a body. From a thermodynamical point of view, comparability between measurements on a steel trolley and real cooling scenarios with common substrates like normal floors, asphalt or soil remains questionable. It could be shown that not only the type of substrate but also its composition can have a considerable influence on the postmortem body cooling rate.