'Adulterant or contaminant in MT-45, or coingestion?' Reply from the authors

Coprecipitation is the contamination of a precipitate by otherwise soluble species and occurs via different processes. In colloidal precipitates, coprecipitation occurs via surface adsorption. For instance, barium sulfate has a primary layer of adsorbed barium ions and a secondary layer of nitrate counterions. This results in contamination of the precipitate by barium nitrate.
Sometimes, ions in a crystal lattice can undergo isomorphous replacement by inclusions of similar charge and size. For...

EDTA titrations may necessitate masking and demasking agents to temporarily protect a particular metal ion in a mixture from the EDTA reaction. These agents facilitate the sequential analysis of the metal ions by forming stable complexes with some—but not all—metal ions during certain steps.
There are many masking agents, such as cyanide, fluoride, triethanolamine, thiourea, and 2,3-bis(sulfanyl)propan-1-ol (formerly 2,3-dimercapto-1-propanol), with the masking agent chosen based on...

In cases of acute poisoning, the primary objective is to prevent further absorption of the toxic substance into the body. Immediate interventions using various decontamination techniques targeting the gastrointestinal (GI) tract can achieve this. Decontamination is crucial to prevent poison from entering the systemic circulation, which involves washing affected areas with water and mild soap and removing contaminated clothing. Once external decontamination is done, attention must be turned to...

The high insolubility of some precipitates can result in an unfavorable relative supersaturation. This can lead to colloidal particles with a large surface-to-mass ratio, where adsorption is promoted. For instance, in the precipitation of silver chloride, silver ions are adsorbed on the surface of the colloidal particles, forming a primary layer. This layer attracts ions of opposite charge (such as nitrate ions), forming a diffuse secondary layer of adsorbed ions. This electric double layer...

Deleterious substances in aggregates can be detrimental to the quality and durability of concrete. These substances include organic impurities like loam, which interfere with cement hydration and are usually present in the sand. These prevent a good bond between aggregate and cement paste. Organic impurities can be detected using the colorimetric test, where the darkness of a solution after agitation indicates the level of organic content.
Another type of impurity is clay and fine material that...

Pharmaceutical products contain more than just the active drug; they also contain various excipients such as binders, solubilizers, stabilizers, preservatives, and other elements. In some cases, impurities or contaminants might be present. Traditionally, quality control in pharmaceuticals has primarily focused on the analysis of the active drug, often overlooking the impact of these additional components. The recent issue with heparin contamination by over-sulfated chondroitin sulfate, a...