Related Experiment Video
Updated: Mar 2, 2026

A New Murine Model of Endovascular Aortic Aneurysm Repair
Published on: July 7, 2013
Parallel-Stenting Technique in a Sandwich Configuration for Hypogastric Artery Preservation during Endovascular
Xavier Yugueros1, Gaspar Mestres1, Savino Pasquadibisceglie1
1Vascular Surgery Division, Cardiovascular Institute, Hospital Clinic, Barcelona, Spain.
Background:
The aim of the study was to identify the best conditions in iliac sandwich procedure for hypogastric artery preservation during endovascular aneurysm repair, testing different devices, different oversizing (OS) degrees as well as different methods to measure it.
Methods:
Four external iliac devices (16-mm Endurant and 12-mm Aorfix limb extensions; 11- and 13-mm Viabahn endografts) were tested with 2 distinct internal iliac stent grafts (8-mm Advanta V12 and 8-mm Viabahn) inside different proximal silicon iliac limb models (10, 12, 14, 16, and 18 mm), simulating an iliac sandwich procedure for hypogastric preservation. After remodeling all devices in a saline bath at 37°C, the combinations were computed tomography scanned. Gutter size, parallel-stent compression, and inadequate parallel-stent deployment or infolding were recorded. Oversizing between both parallel stents and the iliac limb models were examined in terms of added diameter, perimeter, and area being additionally compared.
Results:
All three sizing methods (diameter, perimeter, and area) were highly correlated (diameter OS to perimeter and area OS correlation coefficient 0.998 and 0.997, respectively, P < 0.001 for both); thus, diameter OS was used for further comparisons. Increasing diameter OS (< 30%, 30-55%, 55-75%, and > 75%) showed a significant tendency toward smaller gutters (38.9, 12.2, 5.4, and 2.6 mm2, respectively, P < 0.001) but also increasing parallel-stent compression (13.5%, 28.9%, 43.9%, and 55.1%, P < 0.001) and infolding (0%, 0%, 38%, and 60%, P < 0.001). There were no significant differences between the analyzed devices.
Conclusions:
In iliac sandwich procedures, better apposition is usually achieved when using 30-55% diameter OS; higher OS is related to smaller gutters but higher rates of malpositioning and parallel-stent compression. No clear recommendations in material selection can be performed. All sizing methods are highly correlated and predictable.

