Analysis of cutting-oil emulsion destabilization by aluminum sulfate
Nattawin Chawaloesphonsiya1, Pascal Guiraud2, Pisut Painmanakul1,3
1a Department of Environmental Engineering, Faculty of Engineering , Chulalongkorn University , Bangkok , Thailand.
Abstract:
The destabilization mechanism of the high stable cutting-oil emulsion by aluminum sulfate (Al2(SO4)3) was investigated since it can affect properties of aggregates and following separation units. Al2(SO4)3 dosage and pH were key factors in the destabilization. The effective separation occurred when precipitated Al(OH)3 is dominated at the neutral pH of 6.5-7.0. The best separation can be achieved when solid flocs were formed at 1.0 mM, which exceeded the dosage from the critical coagulation concentration (CCC) of 0.75 mM. Two different mechanisms were proved for the emulsion destabilization depending upon the Al3+ concentration under this pH range. The first mechanism was the adsorption of Al(OH)3 on surface of oil droplets, which led to the droplet coalescence. By increasing the Al3+ dosage, the sweep flocculation by Al(OH)3 precipitates occurred. Al3+ dosage for effective destabilization was increased in accordance with oil concentration. The formation of aluminum hydroxide precipitates in bayerite structure was affirmed by analyzing elemental composition and crystalline structure of flocs from the destablization.
Related Concept Videos
Colloids
Oxidative Cleavage of Alkenes: Ozonolysis
Ozone is a symmetrical bent molecule stabilized by a resonance structure.
Oxidation of Alkenes: Syn Dihydroxylation with Potassium Permanganate
The Colloidal State
Colloidal precipitates
Oxidation of Alkenes: Syn Dihydroxylation with Osmium Tetraoxide


