SU-E-T-21: Modeling a MLC Scatter Source for In-Air Output Factors
S Park1,2,3,4,5,6,7, S Kim1,2,3,4,5,6,7, Y Park1,2,3,4,5,6,7
1Interdisciplinary Program in Radiation Applied Life Science, Seoul National University, and Institute of Radiation Medicine, Seoul National University Medical Research Center, Seoul.
Purpose:
Scattered radiation from multi-leaf collimators (MLCs) is no longer negligible for calculating in-air output ratio, Sc for small and irregular fields often used in intensity-modulated radiation therapy (IMRT). An extra-focal source model for scattered radiation from MLCs, namely MLC scatter source, has been developed to improve the accuracy of the Sc calculation.
Methods:
A conventional dual-source model was made by using Sc data that were measured for collimator-defined fields of Varian Clinac IX linear accelerator. Then, an MLC scatter source at the center of the MLC position of the linear accelerator was assumed in the model. The MLC scatter source model consisted of two Gaussian functions of which parameters were iteratively optimized against the Sc data measured for different MLC fields with fixed collimator sizes. To evaluate the effectiveness of the developed source model, measurements were made for various MLC-defined irregular or square fields. The calculated Sc data by using (1) the developed source model and (2) the conventional dual source model were compared with the measured data.
Results:
The mean discrepancy between the measured Sc and calculated Sc from the developed source model was 0.08+-0.28%, while one from the conventional source model was 0.44+-0.39%.
Conclusions:
The developed MLC scatter source model in conjunction with the dual source model could improve the accuracy of the Sc calculation in IMRT fields.
Related Concept Videos
Series RLC Circuit with Source
In this context, the input DC voltage serves as a forcing step function, resulting in a forced step response that mirrors the characteristics of the input. Applying Kirchhoff's voltage law to the circuit yields a...
Mesh Analysis with Current Sources
Current Source in One Mesh: The analysis process is straightforward when a current source is found in only one mesh within the circuit. Mesh currents are assigned as usual, with the mesh containing the current source excluded from the analysis. Kirchhoff's voltage law...
Scatter Plot
Plane Potential Flows
Uniform...


