Related Experiment Video
Updated: Mar 1, 2026

Characterization, Quantification and Compound-specific Isotopic Analysis of Pyrogenic Carbon Using Benzene Polycarboxylic Acids BPCA
Published on: May 16, 2016
A green analytical method for benzoyl peroxide determination by a sequential injection spectrophotometry using
Sam-Ang Supharoek1, Kraingkrai Ponhong2, Kate Grudpan3
1Science and Liberal Art, Amnatcharoen Campus, Mahidol University, Amnatcharoen 37000, Thailand.
Abstract:
A green and environmental friendly method with simple sequential injection spectrophotometry using natural reagent extract from pumpkin (Cucurbita moschata Decne) for determination of benzoyl peroxide (BPO) was developed. The maximum absorption of the yellow crude extract containing the β-carotene compound occurred at a wavelength of 450nm. The yellow extract solution was bleached by BPO to change the color to a colorless solution. The optimum conditions of the proposed method, such as extraction solvent influence of pH, dilution of pumpkin extracts solution, aspiration volume of reagent and sample, flow reversal, incubation time, mixing coil length, and dispensing flow rate were studied and optimized. The linear calibration graph under the optimum conditions in the range of 9.4-100mgL-1 BPO was obtained with good linearity (r2=9985). The limit of detection (LOD) and the limit of quantification (LOQ) were 3.9 and 9.4mgL-1, respectively. Relative standard deviation was achieved at less than 4% (n=7). This system provided sample throughput of 9h-1. Good recoveries were found between 83.42±3.34-112.29±3.49%. The system was successfully employed as a natural reagent extract from pumpkin for determination of BPO in acne treatment samples. Also, the results agreed well with those obtained from the HPLC-UV method.

