Related Experiment Video
Updated: Mar 1, 2026

A Uniaxial Compression Experiment with CO2-Bearing Coal Using a Visualized and Constant-Volume Gas-Solid Coupling Test System
Published on: June 12, 2019
Impact of suspended coal dusts on methane deflagration properties in a large-scale straight duct
Mohammed J Ajrash1, Jafar Zanganeh1, Behdad Moghtaderi1
1The Frontier Energy Technologies Centre, Chemical Engineering, School of Engineering, Faculty of Engineering & Built Environment, The University of Newcastle, Callaghan, NSW 2308, Australia.
Abstract:
Knowledge about flame deflagrations in mixtures of methane and diluted coal dust assists in the prediction of fires and explosions, and in the design of adequate protective systems. This vital lack of information on the role of hybrid mixtures (methane/coal dust) is covered in this work by employing a novel Large-Scale Straight Duct (LSSD) designed specifically for this purpose. The hybrid fuel was injected along the first 8m of the 30m long LSSD. The results revealed that a 30gm-3 coal dust concentration boosted the flame travel distance, from 6.5m to 28.5m, and increased the over pressure rise profile to 0.135bar. The over pressure rise (OPR), pressure wave velocity, flame intensity and the flame velocity were significantly boosted along the LSSD in the presence of 10gm-3 or 30gm-3 coal dust concentrations in the methane flame deflagrations. Finally, the high speed camera showed that the presence of the coal dust enhanced the turbulence in the front flame. Consequently, the pressure wave and flame velocities were both increased when a 10gm-3 coal dust concentration coexisted with a 9.5% methane concentration in the deflagration.
More Related Videos
10:29Experimental Methodology for Estimation of Local Heat Fluxes and Burning Rates in Steady Laminar Boundary Layer Diffusion Flames
Published on: June 1, 2016
07:23Experimental Study of the Relationship Between Particle Size and Methane Sorption Capacity in Shale
Published on: August 2, 2018