Comparing polyethylene and polyoxymethylene passive samplers for measuring sediment porewater concentrations of...

Two sediment passive samplers, polyethylene (PE) and polyoxymethylene (POM), were compared and mutually validated for measuring freely dissolved concentrations (C_free) of polychlorinated biphenyls (PCBs) in sediment porewater. PE and POM strips in commonly used dimensions (30 and 76 μm in thickness, respectively) were exposed to sediment slurries for 28 d. The C_free values calculated using literature polymer-water partition coefficients were consistently higher for PE than for POM by a factor of 2 on average. Time series experiments over 96 d show that 28 d are sufficient for attaining partition equilibrium of PCBs for PE, whereas even 96 d may not be enough for POM. To gain additional insight, POM and PE strips were co-exposed to bovine serum albumin suspension spiked with PCBs. The POM/PE concentration ratios increased over 56 d, and the ratios at 28 d were in agreement with the POM-to-PE ratios of PCB concentrations from the 28-d sediment slurry experiments. This agreement suggests that the use of apparent POM-water partition coefficients (i.e., non-equilibrium concentration ratios) suitable for a 28-d exposure to sediment slurries may correct the non-attainment of equilibrium and could provide more accurate C_free values.