Disilicate-Assisted Iron Electrolysis for Sequential Fenton-Oxidation and Coagulation of Aqueous Contaminants

Sodium disilicate (SD), an inorganic and environmentally friendly ligand, is introduced into the conventional iron electrolysis system to achieve an oxidizing Fenton process to degrade organic pollutants. Electrolytic ferrous ions, which are complexed by the disilicate ions, can chemically reduce dioxygen molecules via consecutive reduction steps, producing H₂O₂ for the Fenton-oxidation of organics. At the near-neutral pH (from 6 to 8), the disilicate-Fe(II) complexes possess strong reducing capabilities; therefore, a near-neutral pH rather than an acid condition is preferable for the disilicate-assisted iron electrolysis (DAIE) process. Following the DAIE process, the different complexing capacities of disilicate for ferrous/ferric ions and calcium ions can be used to break the disilicate-iron complexes. The addition of CaO or CaCl₂ can precipitate ferrous/ferric ions, disilicates and possibly heavy metals in the wastewater. Compared to previously reported organic and phosphorus ligands, SD is a low-cost inorganic agent that does not lead to secondary pollution, and would not compete with the target organic pollutants for •OH; therefore, it would greatly expand the application fields of the O₂ activation process. The combination of DAIE and CaO treatments is envisioned to be a versatile and affordable method for treating wastewater with complicated pollutants (e.g., mixtures of biorefractory organics and heavy metals).