Related Experiment Video
Updated: Feb 28, 2026

Design and Characterization Methodology for Efficient Wide Range Tunable MEMS Filters
Published on: February 4, 2018
Single- and dual-band filtering-response power dividers embedded SIW filter with improved output isolation
Kaijun Song1, Yu Zhu2, Fan Zhang2
1EHF Key Laboratory of Science, School of Electronic Engineering, University of Electronic Science and Technology of China, Chengdu, Sichuan, 611731, P. R. China. ksong@uestc.edu.cn.
Abstract:
Two filtering-response power dividers embedded substrate integrated waveguide (SIW) filter are presented in this paper. By employing different SIW resonators, single- and dual-band filtering response are achieved, respectively. The even- and odd-mode method and the coupled resonator theory are applied to analyze the presented power dividers. In addition, a novel isolation technique using multiple isolation resistors is proposed to improve the output isolation performance of the filtering-response power divider with multiple resonators. To verify the proposed circuits, the single- and dual-band filtering-response power dividers are designed, fabricated and measured. Reasonable agreement between the simulated and measured results is achieved. Moreover, the measured output isolation of the fabricated dual-band filtering-response power divider with multiple resonators is about 20 dB, which demonstrates the theoretical predication.
Related Concept Videos
Active Filters
Parallel Resonance
Passive Filters
Low-Pass Filters
Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff...
Clipper Circuit
The operation of a clipper circuit can be exemplified by analyzing a dual-clipper configuration setup that integrates two ideal diodes, each paired with a biasing...
Design Example
Design Example: Capacitance Multiplier Circuit
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.

