A high sensitive visible light-driven photoelectrochemical aptasensor for shrimp allergen tropomyosin detection using...

Herein, for the first time a visible-light-driven photoelectrochemical (PEC) aptasensor for shrimp tropomyosin determination was fabricated by using graphitic carbon nitride (g-C₃N₄) and titanium dioxide (TiO₂) as photoactive nanomaterials, ascorbic acid (AA) as electron donor and ruthenium (III) hexaammine (Ru(NH₃)₆³⁺) as signal enhancer. The surface of an ITO electrode was first modified with g-C₃N₄, TiO₂, and polyethyleneimine (PEI) and then the amine terminal aptamer_TROP probe was attached to PEI by the use of glutaraldehyde (GA) as cross-linker. After that, Ru(NH₃)₆³⁺ was adsorbed on aptamer to enhance the photocurrent signal. The principle of proposed PEC aptasensor is based on the formation of a selective complex between tropomyosin and immobilized aptamer_TROP probe on the surface of ITO/g-C₃N₄-TiO₂/PEI/aptamer_TROP-Ru(NH3)₆⁺³. After the incubation of tropomyosin with TROP aptamer probe, the photocurrent signal decreased due to releasing adsorbed Ru(NH₃)₆³⁺ on aptamer and preventing AA from scavenging photogenerated holes to the photoactive modified electrode. Under the optimized conditions, the fabricated PEC aptasensor was used for the determination of shrimp tropomyosin in the concentration range of 1-400ngmL^-1 with a limit of detection of 0.23ngmL^-1. The proposed PEC aptasensor exhibited high selectivity, sensitivity, and good stability.