Capillary electrophoresis with capacitively coupled contactless conductivity detection method development and...

A capillary electrophoresis with capacitively coupled contactless conductivity detection based method for the assay of azithromycin, clarithromycin and clindamycin was optimized and validated in this study. A buffer solution of 20 mM 2-(N-morpholino) ethane sulfonic acid, 40 mM l-histidine and 0.6 mM cetyltrimethylammonium bromide (pH 6.39) was used for the electrophoresis. An uncoated, bare-fused silica capillary (total length 60 cm, effective length 32 cm, 75 μm id) was used at 25°C. The sample was injected hydrodynamically at 0.5 psi for 5 s. The electrophoresis was conducted at 30 kV in reverse polarity for 6 min with 3 and 2 min of in-between sodium hydroxide (0.1 M) and background electrolyte rinsing, respectively. Ammonium acetate was used as internal standard. This simple and robust method showed reasonable limit of detection and limit of quantitation for azithromycin (0.0125/0.03 mg/mL), clarithromycin (0.017/0.03 mg/mL), and clindamycin (0.038/0.06 mg/mL), with good selectivity, precision both intraday (relative standard deviation ≤ 1.0%) and interday (relative standard deviation < 3.7%), linearity (R²  > 0.999) and recovery (99 - 101.7%). The method was successfully applied for the determination of azithromycin, clarithromycin and clindamycin in formulations.