Pilot Findings of Brain Displacements and Deformations during Roller Coaster Rides

Calvin Kuo1, Lyndia C Wu2, Patrick P Ye2

  • 11 Department of Mechanical Engineering, Stanford University , Stanford, California.

Related Concept Videos

Equilibrium and Balance01:15

Equilibrium and Balance

The inner ear assumes dual functionalities of auditory perception and equilibrium maintenance. The vestibule is the organ responsible for balance. This organ contains mechanoreceptors, specifically hair cells, endowed with stereocilia, which aid in deciphering information regarding the position and motion of our heads. Two intrinsic components, the utricle and saccule, help perceive head position, while the semicircular canals track head movement. Neurological messages initiated in the...
6.1K
Relative Motion Analysis - Acceleration01:10

Relative Motion Analysis - Acceleration

A slider-crank mechanism converts rotational motion from the crank into linear motion of the slider or vice versa. This mechanism consists of three main parts: the crank, the connecting rod, and the slider. The movement of the slider-crank is an example of general plane motion as the fluctuating angle between the crank and the connecting rod. Consider a segment AB where point A is at the end of the slider and point B is on the diametrically opposite end to point A, on a crack. The variance in...
779
Deformation in a Circular Shaft01:10

Deformation in a Circular Shaft

One of the distinctive characteristics of circular shafts is their ability to maintain their cross-sectional integrity under torsion. In other words, each cross-section continues to exist as a flat, unaltered entity, simply rotating like a solid, rigid slab. To understand the distribution of shearing stress within such a shaft, consider a cylindrical section inside this circular shaft. This section has a length of L and a radius of R, with one end fixed. The radius of the cylindrical section is...
813
Deformation of Member under Multiple Loadings01:11

Deformation of Member under Multiple Loadings

When a rod is made of different materials or has various cross-sections, it must be divided into parts that meet the necessary conditions for determining the deformation. These parts are each characterized by their internal force, cross-sectional area, length, and modulus of elasticity. These parameters are then used to compute the deformation of the entire rod.
In the case of a member with a variable cross-section, the strain is not constant but depends on the position. The deformation of an...
422