Related Experiment Video
Updated: Feb 27, 2026

Ambient Method for the Production of an Ionically Gated Carbon Nanotube Common Cathode in Tandem Organic Solar Cells
Published on: November 5, 2014
High-Efficiency Nonfullerene Organic Solar Cells with a Parallel Tandem Configuration
Lijian Zuo1, Jiangsheng Yu1,2, Xueliang Shi1
1Department of Materials Science and Engineering, University of Washington, Seattle, WA, 98195, USA.
Abstract:
In this work, a highly efficient parallel connected tandem solar cell utilizing a nonfullerene acceptor is demonstrated. Guided by optical simulation, each of the active layer thicknesses of subcells are tuned to maximize its light trapping without spending intense effort to match photocurrent. Interestingly, a strong optical microcavity with dual oscillation centers is formed in a back subcell, which further enhances light absorption. The parallel tandem device shows an improved photon-to-electron response over the range between 450 and 800 nm, and a high short-circuit current density (J SC ) of 17.92 mA cm-2 . In addition, the subcells show high fill factors due to reduced recombination loss under diluted light intensity. These merits enable an overall power conversion efficiency (PCE) of >10% for this tandem cell, which represents a ≈15% enhancement compared to the optimal single-junction device. Further application of the designed parallel tandem configuration to more efficient single-junction cells enable a PCE of >11%, which is the highest efficiency among all parallel connected organic solar cells (OSCs). This work stresses the importance of employing a parallel tandem configuration for achieving efficient light harvesting in nonfullerene-based OSCs. It provides a useful strategy for exploring the ultimate performance of organic solar cells.
More Related Videos
08:29Morphology Control for Fully Printable Organic–Inorganic Bulk-heterojunction Solar Cells Based on a Ti-alkoxide and Semiconducting Polymer
Published on: January 10, 2017
06:49In situ Grazing Incidence Small Angle X-ray Scattering on Roll-To-Roll Coating of Organic Solar Cells with Laboratory X-ray Instrumentation
Published on: March 2, 2021