The mechanical behavior of TiNbSn alloys according to alloying contents, cold rolling and aging

The present study is focused on mechanical properties that result from cold rolling and aging treatments applied to TiNbSn alloys comprising different Nb (35% and 42%) and Sn (0% and 2.5%) contents. The alloys were arc melted, homogenized, solubilized, cold rolled and aged at 400°C for different aging times. A set of characterization tests performed, included microstructural analysis, X-ray diffraction, microhardness, tensile tests and fracture analysis. The alloys contained all three β, α" and ω phases after cold rolling, regardless of the alloying content. The solid solution effect led to changes in the alloys' mechanical behavior. Furthermore, the alloys presented α phase precipitation, and it led to a peak-aged stage after different aging times due to the Nb content. The alloys containing 42% and 35% Nb content reached the peak-aged stage within 48 and 72h, respectively. The α phase precipitation in the alloys at peak-aged stage increased the hardness, tensile strength and elastic modulus of the alloys; however, it also caused ductility to decrease. The fine dispersed precipitates of the α phase generated small and shallow dimples, which are a characteristic fracture micromechanism of peak-aged alloys.