Acid-Base Polymeric Foams for the Adsorption of Micro-oil Droplets from Industrial Effluents

Separation of toxic organic pollutants from industrial effluents is a great environmental challenge. Herein, an acid-base engineered foam is employed for separation of micro-oil droplets from an aqueous solution. In acidic or basic environments, acid-base polymers acquire surface charge due to protonation or dissociation of surface active functional groups. This property is invoked to adsorb crude oil microdroplets from water using polyester polyurethane (PESPU) foam. The physicochemical surface properties of the foam were characterized using X-ray photoelectron spectroscopy, inverse gas chromatography, electrokinetic analysis, and micro-computed tomography. Using the surface charge of the foam and oil droplets, the solution pH (5.6) for maximum separation efficacy was predicted. This optimal pH was verified through underwater wetting behavior and adsorption experiments. The droplet adsorption onto the foam was governed by physisorption, and the driving forces were attributed to electrostatic attraction and Lifshitz-van der Waals forces. The foam was regenerated and reused multiple times by simple compression. The lowest trace oil content in the retentate was 3.6 mg L^-1, and all oil droplets larger than 140 nm were removed. This work lays the foundation for the development of a new class of engineered foam adsorbents with the potential to revolutionize water treatment technologies.