Development of immunoaffinity solid phase microextraction rods for analysis of three estrogens in environmental water...

In this study, immunoaffinity solid phase microextraction (SPME) rods were developed for the analysis of diethylstilbestrol (DES), hexestrol (HES) and dienestrol (DIS) followed by ultra high-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). This immunoaffinity SPME device was built with three stainless steel rods bundled together as one and modified with porous silicate particles. As an extraction sorbent, antibody immobilization approach was employed based on the covalent attachment of the anti-diethylstilbestrol monoclonal antibody (mAb) onto the rods. The immunoaffinity SPME rod was characterized and confirmed by scanning electron microscopy and X-ray photoelectron spectroscopy analysis. The porous network showed a very large active surface area and significantly increased the adsorption capacity which can reach 49.6pmol/cm². Moreover, the immunoaffinity sorbent showed good sturdiness at least 10 times with stable extraction performance. Once the main experimental parameters were optimized, the method was used to detect DES, HES and DIS in environmental water samples. The limits of detection for the three estrogens were 0.05-0.15ng/mL, and the limits of quantification was 0.5ng/mL. The average recoveries ranged from 34.2 to 62.7% were achieved with good intra-day and inter-day precision ranging from 7.8 to 12.7% and from 8.2 to 13.5% respectively. The newly developed immunoaffinity SPME showed high adsorption capacity, good sensitivity and reproducibility and was successfully applied to the analysis of DES, HES and DIS in environmental water samples.