Vortex-assisted liquid-liquid microextraction of strontium from water samples using 4',4″(5″)-di-(tert-butylcyclohexano)-18-crown-6 and tetraphenylborate
Related Experiment Video
Updated: Feb 25, 2026

Automated 90Sr Separation and Preconcentration in a Lab-on-Valve System at Ppq Level
Published on: June 6, 2018
Chin-Yi Wang1, Da-An Chang1, Yuzhou Shen1
1Department of Biomedical Engineering and Environmental Sciences, College of Nuclear Science, National Tsing Hua University, Hsinchu, Taiwan.
Abstract:
A vortex-assisted liquid-liquid microextraction method was developed for the chromatographic determination of strontium in aqueous samples. In the method, strontium was complexed with 4',4″(5″)-di-(tert-butylcyclohexano)-18-crown-6 in the presence of tetraphenylborate as the counter anion, which increased the hydrophobicity of the ion-association complex, resulting in its improved extraction into 1-octanol. Strontium from the organic phase was stripped with nitric acid back to aqueous solution and determined by ion chromatography. The optimum microextraction conditions were as follows: 2.0 mL aqueous samples with 3 mM tetraphenylborate; 150 μL of 1-octanol as the extractant phase with 10 mM DtBuCH18C6; vortex extraction time for 10 s; centrifugation at 6000 rpm for 4 min; stripping by 0.1 M nitric acid. Under the optimum conditions, the detection limit for strontium was 0.005 mg/L. The calibration curves showed good linearity over the range between 0.01 and 2.5 mg/L. Intra- and interday precisions of the present method were satisfactory with relative standard deviations of 1.7 and 2.1%, respectively.
More Related Videos
Related Concept Videos
Extraction: Advanced Methods
Qualitative Analysis
For instance, group IV...

