Measurement properties of the WheelCon for powered wheelchair users

Paula W Rushton1,2, François Routhier3,4, William C Miller5,6

  • 1a École de réadaptation , Université de Montréal , Montréal , Canada.

Abstract

Related Concept Videos

Rolling Resistance: Problem Solving01:17

Rolling Resistance: Problem Solving

Rolling resistance, also known as rolling friction, is the force that resists the motion of a rolling object, such as a wheel, tire, or ball, when it moves over a surface. It is caused by the deformation of the object and the surface in contact with each other, as well as other factors like internal friction, hysteresis, and energy losses within the materials. Rolling resistance opposes the object's motion, requiring additional energy to overcome it and maintain movement. In practical...
874
Mass Moment of Inertia: Problem Solving01:13

Mass Moment of Inertia: Problem Solving

Knowing how to determine the moment of inertia in a wheel's axle can be invaluable in engineering and automotive applications. It provides an understanding of how changes in geometry, mass, and radius can impact its performance.
The axle can be approximated to a solid cylinder with longitudinal and perpendicular axes. Initially, a thin disc is considered parallel to the circular face of the cylinder.
711
Rolling Resistance01:21

Rolling Resistance

When a solid cylinder rolls steadily on a rigid surface, the normal force applied by the surface on the cylinder is perpendicular to the tangent at the contact point. However, since no materials are entirely rigid, the surface's reaction to the cylinder involves a range of normal pressures.
For instance, imagine a hard cylinder rolling on a comparatively soft surface. The cylinder's weight compresses the surface beneath it. As the cylinder moves, the material in front of it slows down due to...
697
Normal and Tangetial Components: Problem Solving01:24

Normal and Tangetial Components: Problem Solving

Consider a man with a mass of 70 kg seated in a chair connected to a pin support through a member BC. If the man maintains an upright position, the task is to determine the horizontal and vertical reactions of the chair on the man when the member makes a 45° angle with the horizontal. At this moment, the man has a speed of 5 m/s, increasing at a rate of 1 m/s².
621