Related Experiment Video
Updated: Feb 25, 2026

Evaluation of an Exclusive Spur Dike U-Turn Design with Radar-Collected Data and Simulation
Published on: February 1, 2020
Errors in accident data, its types, causes and methods of rectification-analysis of the literature
Ashar Ahmed1, Ahmad Farhan Mohd Sadullah1, Ahmad Shukri Yahya1
1School of Civil Engineering, Universiti Sains Malaysia, Pulau Pinang, Malaysia.
Abstract:
Most of the decisions taken to improve road safety are based on accident data, which makes it the back bone of any country's road safety system. Errors in this data will lead to misidentification of black spots and hazardous road segments, projection of false estimates pertinent to accidents and fatality rates, and detection of wrong parameters responsible for accident occurrence, thereby making the entire road safety exercise ineffective. Its extent varies from country to country depending upon various factors. Knowing the type of error in the accident data and the factors causing it enables the application of the correct method for its rectification. Therefore there is a need for a systematic literature review that addresses the topic at a global level. This paper fulfils the above research gap by providing a synthesis of literature for the different types of errors found in the accident data of 46 countries across the six regions of the world. The errors are classified and discussed with respect to each type and analysed with respect to income level; assessment with regard to the magnitude for each type is provided; followed by the different causes that result in their occurrence, and the various methods used to address each type of error. Among high-income countries the extent of error in reporting slight, severe, non-fatal and fatal injury accidents varied between 39-82%, 16-52%, 12-84%, and 0-31% respectively. For middle-income countries the error for the same categories varied between 93-98%, 32.5-96%, 34-99% and 0.5-89.5% respectively. The only four studies available for low-income countries showed that the error in reporting non-fatal and fatal accidents varied between 69-80% and 0-61% respectively. The logistic relation of error in accident data reporting, dichotomised at 50%, indicated that as the income level of a country increases the probability of having less error in accident data also increases. Average error in recording information related to the variables in the categories of location, victim's information, vehicle's information, and environment was 27%, 37%, 16% and 19% respectively. Among the causes identified for errors in accident data reporting, Policing System was found to be the most important. Overall 26 causes of errors in accident data were discussed out of which 12 were related to reporting and 14 were related to recording. "Capture-Recapture" was the most widely used method among the 11 different methods: that can be used for the rectification of under-reporting. There were 12 studies pertinent to the rectification of accident location and almost all of them utilised a Geographical Information System (GIS) platform coupled with a matching algorithm to estimate the correct location. It is recommended that the policing system should be reformed and public awareness should be created to help reduce errors in accident data.
More Related Videos
Related Concept Videos
Types of Errors: Detection and Minimization
Absolute error in a measurement is the numerical difference from the true or central value. Relative error is the ratio between absolute error and the true or central value, expressed as a percentage.
Errors can be classified by source, magnitude, and sign. There are three types of errors: systematic, random, and gross.
Systematic or...
Systematic Error: Methodological and Sampling Errors
Sampling errors originate from improper sampling methods or the wrong sample population. These errors can be minimized by refining the sampling strategy. Defective instruments or faulty calibrations are the sources of instrumental...
Errors and Mistakes in Surveying
Random and Systematic Errors
Errors in Taping
Contaminants and Errors
Another key consideration is determining the appropriate number of samples required to...

