Related Experiment Video
Updated: Feb 25, 2026
Process of Making Three-dimensional Microstructures using Vaporization of a Sacrificial Component
Published on: November 2, 2013
Manufacturing the Gas Diffusion Layer for PEM Fuel Cell Using a Novel 3D Printing Technique and Critical Assessment
Arunkumar Jayakumar1, Sarat Singamneni2, Maximiano Ramos3
1Mechanical Engineering Department, Auckland University of Technology, Auckland 1010, New Zealand. ajayakum@aut.ac.nz.
Abstract:
The conventional gas diffusion layer (GDL) of polymer electrolyte membrane (PEM) fuel cells incorporates a carbon-based substrate, which suffers from electrochemical oxidation as well as mechanical degradation, resulting in reduced durability and performance. In addition, it involves a complex manufacturing process to produce it. The proposed technique aims to resolve both these issues by an advanced 3D printing technique, namely selective laser sintering (SLS). In the proposed work, polyamide (PA) is used as the base powder and titanium metal powder is added at an optimised level to enhance the electrical conductivity, thermal, and mechanical properties. The application of selective laser sintering to fabricate a robust gas diffusion substrate for PEM fuel cell applications is quite novel and is attempted here for the first time.
