Related Experiment Video

Updated: Feb 25, 2026

Application of a Coupling Agent to Improve the Dielectric Properties of Polymer-Based Nanocomposites
06:34

Application of a Coupling Agent to Improve the Dielectric Properties of Polymer-Based Nanocomposites

Published on: September 19, 2020

6.4K

Polymer Nanocomposites-A Comparison between Carbon Nanotubes, Graphene, and Clay as Nanofillers

Mrinal Bhattacharya1

  • 1Department of Bioproducts and Biosystems Engineering, University of Minnesota, St. Paul, MN 55108, USA. bhatt002@umn.edu.

Materials (Basel, Switzerland)
|August 5, 2017
PubMed

Keywords:
carbon nanotubesgraphene, claypolymer nanocompositesproperties

More Related Videos

Manufacturing of Three-dimensionally Microstructured Nanocomposites through Microfluidic Infiltration14:24

Manufacturing of Three-dimensionally Microstructured Nanocomposites through Microfluidic Infiltration

Published on: March 12, 2014

12.9K
Advanced Compositional Analysis of Nanoparticle-polymer Composites Using Direct Fluorescence Imaging07:41

Advanced Compositional Analysis of Nanoparticle-polymer Composites Using Direct Fluorescence Imaging

Published on: July 19, 2016

8.1K

Related Concept Videos

Additives and Fillers in Concrete01:29

Additives and Fillers in Concrete

Additives and fillers are integral to enhancing the properties of concrete. Pozzolans and blast-furnace slag are additives or admixtures due to their reactions with calcium hydroxide released during cement hydration. Fillers, which are finely ground and similar in fineness to Portland cement, improve concrete attributes such as workability density, and reduce capillary bleeding or cracking. Some fillers possess hydraulic properties or participate in benign reactions within the cement paste.
The...
396
Polymer Classification: Architecture01:14

Polymer Classification: Architecture

Polymers are classified as linear or branched on the basis of their chain architecture. The polymer chains in linear polymers have a long chain-like structure with minimal to no branching at all. Even if a polymer features large substituent groups on the monomer, which appear as branches to the skeleton, it is not considered a branched polymer. A branched polymer contains secondary polymer chains that arise from the main polymer chain. The branching occurs when the polymer growth shifts from...
4.0K