Related Experiment Video
Updated: Feb 25, 2026

Evanescent Field Based Photoacoustics: Optical Property Evaluation at Surfaces
Published on: July 26, 2016
Experimental study on the location of an acoustic emission source considering refraction in different media
Zi-Long Zhou1, Jing Zhou2, Long-Jun Dong2
1School of Resources and Safety Engineering, Central South University, Changsha, 410083, China. zlzhou@mail.csu.edu.cn.
Abstract:
The existing acoustic emission (AE) source location methods assume that acoustic waves propagate along straight lines, and the source location is determined by average wave velocity. Because of the heterogeneity of materials, location results often fail to meet the accuracy requirement. For this reason, an AE source location method considering refraction in different media was proposed in this paper. According to sensor coordinates, the arrival time of acoustic waves, the velocities of acoustic waves in two kinds of media, the space-time relation equations of the AE source point and the measuring point were established by the precise coordinates of the AE source based on Snell's law. The feasibility of the algorithm was verified by experiments, and the factors influencing location accuracy were also analysed. The results show that the algorithm proposed in this paper is applicable for both the same medium and different media, and the accuracy of localization is not affected by the ratio of wave velocities in two media or the distance from the AE source to the refraction surface.
Related Concept Videos
Echo
Imagine the sound is reflected back to the ears. Assuming that the source is very close to the human, the difference between hearing the two sounds—the emitted sound and the reflected sound—may be more than the minimum time for perceiving distinct sounds. If this is the case,...
Deriving the Speed of Sound in a Liquid
The speed of sound in fluids can be derived by considering a mechanical wave...
Influence of Earth's Curvature and Atmospheric Refraction on Leveling
Propagation of Waves
Consider a scenario where a wave propagates from a string of low linear mass density to a string of high linear mass density. In such a case, the reflected wave is out of phase with respect to the incident wave, however the...
Interference: Path Lengths
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...

