Related Experiment Video
Updated: Feb 25, 2026

Optimized Setup and Protocol for Magnetic Domain Imaging with In Situ Hysteresis Measurement
Published on: November 7, 2017
Validation of the Anhysteretic Magnetization Model for Soft Magnetic Materials with Perpendicular Anisotropy
1Institute of Metrology and Biomedical Engineering, Faculty of Mechatronics, Warsaw University of Technology, sw. A. Boboli 8, 02-525 Warsaw, Poland. szewczyk@mchtr.pw.edu.pl.
Abstract:
The paper presents results of validation of the anhysteretic magnetization model for a soft amorphous alloy with significant perpendicular anisotropy. The validation was carried out for the Jiles-Atherton model with Ramesh extension considering anisotropy. Due to the fact that it is difficult to measure anhysteretic magnetization directly, the soft magnetic core with negligible hysteresis was used. The results of validation indicate that the Jiles-Atherton model with Ramesh extension should be corrected to allow accurate modeling of the anhysteretic magnetization. The corrected model may be applied for modeling the cores of current transformers operating in a wide range of measured currents.
Related Concept Videos
Ferromagnetism
Magnetic Susceptibility and Permeability
When diamagnetic materials are placed under an external magnetic field, the moments opposite to the field are induced. Hence, the susceptibility for diamagnets has a minimal negative value of 10-5–10-6. Since...
Paramagnetism
Diamagnetism
Diamagnetism was discovered by Anton Brugmans in 1778 when he observed that bismuth gets repelled by magnetic fields, thus theorizing that diamagnets get repelled by magnets....
Potential Due to a Magnetized Object
The vector...
Atomic Nuclei: Nuclear Relaxation Processes

