Related Experiment Video
Updated: Feb 25, 2026

Fabrication and Testing of Microfluidic Optomechanical Oscillators
Published on: May 29, 2014
Low-power all-optical microwave filter with tunable central frequency and bandwidth based on cascaded opto-mechanical
Abstract:
We propose and experimentally demonstrate an all-optical microwave filter with tunable central frequency and bandwidth based on two cascaded silicon opto-mechanical microring resonators (MRRs). Due to the Vernier effect, transmission spectrum of the cascaded MRRs is a series of notch bimodal distribution. In the case of intensity modulation with optical double-sideband (ODSB) signals, the optical carrier is fixed between the two resonant peaks of one notch bimodal distribution. By injecting two pump powers to control the above two resonance red-shifts based on the nonlinear effects in opto-mechanical MRRs, the frequency intervals between the optical carrier and the two resonances could be flexibly manipulated for tunable microwave processing. In the experiment, with the highest required pump powers of 1.65 mW and 0.96 mW, the central frequency and bandwidth of the notch microwave photonic filter (MPF) could be tuned from 5 GHz to 36 GHz and 6.7 GHz to 10.3 GHz, respectively. The proposed opto-mechanical device is competent to process microwave signals with dominant advantages of all-optical control, compact footprint, wide tuning range and low-power consumption, which has significant applications in on-chip microwave systems.
Related Concept Videos
Passive Filters
Low-Pass Filters
Low-pass filters are designed to transmit signals with frequencies lower than the cutoff frequency, ωc, and attenuate those above it. The cutoff...
Active Filters
Cascaded Op Amps
In a cascaded system, each op-amp is referred to as a stage. The output of one stage drives the input of the subsequent stage. As the input signal passes through...
Parallel Resonance

