A suspending-droplet mode paper-based microfluidic platform for low-cost, rapid, and convenient detection of lead(II)...

A paper-based microfluidic device based on unconventional principle was developed and used to detect lead ions through a two-step process including heated incubation and subsequent mixing. The device was made by generating a superhydrophobic pattern, which defines channel and reservoir barriers, on a water-impermeable paper substrate, followed by loading and drying the reagents in the defined reservoirs. Different from the conventional paper-based devices that are made of water-permeable paper, the as-prepared device holds water drops in discrete reservoirs, and the water drops will not move unless the device is titled along the direction of the predefined channels. In this way, the liquid samples applied onto the device are handled as individual drops and could be stored, transported, and mixed on demand. Different from the conventional paper-based devices that use capillary force to drive liquid, our new device uses wetting and gravity as driving force. We name this operation principle suspending-droplet mode paper-based device (SD-μPAD). The use of a Teflon contact-printing stamp makes the production of such devices rapid, cost efficient, and mass productive. Utilizing a G-quadruplex-based luminescence switch-on assay, we demonstrated rapid, convenient, highly sensitive, and low cost detection of lead(II) ions in water samples, using a custom made battery-powered portable device, and a smart phone as the detector.