Related Experiment Video
Updated: Feb 24, 2026
Ultrasound Velocity Measurement in a Liquid Metal Electrode
Published on: August 5, 2015
Differentiate low impedance media in closed steel tank using ultrasonic wave tunneling
Chunying Wang1, Zhaojiang Chen2, Wenwu Cao1
1Condensed Matter Science and Technology, Institute and Department of Physics, Harbin Institute of Technology, Harbin 150080, China; Materials Research Institute, The Pennsylvania State University, University Park, PA 16802, USA.
Abstract:
Ultrasonic wave tunneling through seriously mismatched media, such as steel and water, is possible only when the frequency matches the resonance of the steel plate. But it is nearly impossible to realize continuous wave tunneling if the low acoustic impedance media is air because the transducer frequency cannot be made so accurate. The issue might be resolved using tone-burst signals. Using finite element simulations, we found that for air media when the cycle number is 20, the -6dB bandwidth of energy transmission increased from 0.001% to 5.9% compared with that of continuous waves. We show that the tunneling waves can give us enough information to distinguish low acoustic impedance media inside a steel tank.
