Phase-transformation-induced lubrication of earthquake sliding

Frictional failure is not possible at depth in Earth, hence earthquakes deeper than 30-50 km cannot initiate by overcoming dry friction. Moreover, the frequency distribution of earthquakes with depth is bimodal, suggesting another change of mechanism at about 350 km. Here I suggest that the change at 30-50 km is from overcoming dry friction to reduction of effective stress by dehydration embrittlement and that the change at 350 km is due to desiccation of slabs and initiation by phase-transformation-induced faulting. High-speed friction experiments at low pressure indicate that exceeding dry friction provokes shear heating that leads to endothermic reactions and pronounced weakening. Higher-pressure studies show nanocrystalline gouge accompanying dehydration and the highest pressure experiments initiate by exothermic polymorphic phase transformation. Here I discuss the characteristic nanostructures of experiments on high-speed friction and high-pressure faulting and show that all simulated earthquake systems yield very weak transformation-induced lubrication, most commonly nanometric gouge or melt. I also show that phase-transformation-induced faulting of olivine to spinel can propagate into material previously transformed to spinel, apparently by triggering melting analogous to high-speed friction studies at low pressure. These experiments taken as a whole suggest that earthquakes at all depths slide at low frictional resistance by a self-healing pulse mechanism with rapid strength recovery.This article is part of the themed issue 'Faulting, friction and weakening: from slow to fast motion'.