Related Experiment Video
Updated: Feb 24, 2026

Infrared Degenerate Four-wave Mixing with Upconversion Detection for Quantitative Gas Sensing
Published on: March 22, 2019
Direct Detection of Dilute Solid Chemicals with Responsive Lateral Organic Diodes
Jia Huang1, Guoqian Zhang1, Xingang Zhao2
1Interdisciplinary Materials Research Center, Department of Polymeric Materials, School of Materials Science and Engineering, Tongji University , Shanghai 201804, China.
Abstract:
Organic field-effect transistors (OFETs) have emerged as promising sensors targeting chemical analytes in vapors and liquids. However, the direct detection of solid chemicals by OFETs has not been achieved. Here for the first time, we describe the direct detection of solid chemical analytes by organic electronics. An organic diode structure based on a horizontal side-by-side p-n junction was adopted and shown to be superior to OFETs for this purpose. The diodes showed more than 40% current decrease upon exposure to 1 ppm melamine powders. The estimated detection limit to melamine can potentially reach the ppb range. This is the first demonstration of an electronic signal from an interaction between a solid and an organic p-n junction directly, which suggests that our lateral organic diodes are excellent platforms for the development of future sensors when direct detection of solid chemicals is needed. The approach developed here is general and can be extended to chemical sensors targeting various analytes, opening unprecedented opportunities for the development of low-cost and high-performance solid chemical sensors.
Related Concept Videos
High-Performance Liquid Chromatography: Types of Detectors
Gas Chromatography: Types of Detectors-II
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
Photoluminescence: Applications

