Fabrication of biosensor based on Chitosan-ZnO/Polypyrrole nanocomposite modified carbon paste electrode for...

A sensitive conductive nanocomposite sensor consisting of chitosan, zinc oxide nanoparticles, and polypyrrole was developed. The sensor was prepared by oxidative polymerization of pyrrole using (NH₄)₂S₂O₈ as the oxidant followed by mixing a Chitosan-Zinc oxide composite with a different content of Chitosan. The morphology and surface area of the nanocomposites were changed by changing the percentage of chitosan. The newly developed nanocomposites also showed a significant improvement in electrical conductivity as mentioned from the cyclic voltammetry measurements of the K₃[Fe(CN)₆] sample. A square-wave adsorptive anodic stripping voltammetry method successfully measured Isoxsuprine hydrochloride using different types of nanocomposite modified CPEs and showed a large enhancement of stripping peak current compared to bare CPE. Consequently, the proposed sensors proved to have a promissing feature for applications in biosensors.