Related Experiment Video
Updated: Feb 23, 2026
Quasistatic Mechanical Testing for Computer-Aided Design and Manufacturing Occlusal Veneers Cemented to Milled Dentin Analog Material
Published on: December 20, 2024
Evaluation of internal fit of interim crown fabricated with CAD/CAM milling and 3D printing system
Wan-Sun Lee1, Du-Hyeong Lee2, Kyu-Bok Lee1,2
1Advanced Dental Device Development Institute (A3DI), Kyungpook National University, Daegu, Republic of Korea.
Purpose:
This study is to evaluate the internal fit of the crown manufactured by CAD/CAM milling method and 3D printing method.
Materials And Methods:
The master model was fabricated with stainless steel by using CNC machine and the work model was created from the vinyl-polysiloxane impression. After scanning the working model, the design software is used to design the crown. The saved STL file is used on the CAD/CAM milling method and two types of 3D printing method to produce 10 interim crowns per group. Internal discrepancy measurement uses the silicon replica method and the measured data are analyzed with One-way ANOVA to verify the statistic significance.
Results:
The discrepancy means (standard deviation) of the 3 groups are 171.6 (97.4) µm for the crown manufactured by the milling system and 149.1 (65.9) and 91.1 (36.4) µm, respectively, for the crowns manufactured with the two types of 3D printing system. There was a statistically significant difference and the 3D printing system group showed more outstanding value than the milling system group.
Conclusion:
The marginal and internal fit of the interim restoration has more outstanding 3D printing method than the CAD/CAM milling method. Therefore, the 3D printing method is considered as applicable for not only the interim restoration production, but also in the dental prosthesis production with a higher level of completion.
