Related Experiment Video
Updated: Feb 22, 2026

All-electronic Nanosecond-resolved Scanning Tunneling Microscopy: Facilitating the Investigation of Single Dopant Charge Dynamics
Published on: January 19, 2018
Fast and slow transient charging of Oxide Semiconductor Transistors
Taeho Kim1, Sungho Park2, Sanghun Jeon3
1Department of Applied Physics, Korea University, 2511, Sejongro, Sejong, 446-712, Republic of Korea.
Abstract:
The comprehension of the governing mechanism which affects device instability is one of the most important requirements for the formation of reliable oxide-thin film transistors (TFTs). However, a quantitative analysis of the dominant mechanism of device instability, which stems from charge trapping induced by defects at the oxide semiconductor interface as well as in its bulk, has not yet been systematically performed. In this study, we examined subgap states, charge-transport dynamics, and various trap characteristics of oxide TFTs by multi-frequency C-V, pulse I-V, and transient current methods to achieve a comprehensive understanding of carrier transport and charge trapping mechanisms. We found that the charge trapping behavior of the tested amorphous InHfZnO (a-IHZO) TFT follows a multi-trapping mechanism, such as temperature-independent fast transient charge trapping by resonant drift of the injected electron and temperature-dependent slow transient charge trapping by charge transport from occupied to unoccupied traps. Understanding fast charging and slow charging described in this study can help to understand the root cause of device instability of oxide TFTs and ultimately improve stability and reliability characteristics.
Related Concept Videos
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
Switching of BJT
Cut-off Mode ("Off" State): In this state, both the emitter-base and collector-base junctions are...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
Semiconductors
Metals such as copper (Cu), zinc (Zn), or lead (Pb) have low resistivity and feature conduction bands that are either not fully occupied or overlap with the valence band, making a bandgap non-existent. This allows electrons in the highest energy levels of the valence band to easily transition to the conduction band upon gaining...

