Custom Repair of Mandibular Bone Defects with 3D Printed Bioceramic Scaffolds

Implanting artificial biomaterial implants into alveolar bone defects with individual shape and appropriate mechanical strength is still a challenge. In this study, bioceramic scaffolds, which can precisely match the mandibular defects in macro and micro, were manufactured by the 3-dimensional (3D) printing technique according to the computed tomography (CT) image. To evaluate the stimulatory effect of the material substrate on bone tissue regeneration in situ in a rabbit mandibular alveolar bone defect model, implants made with the newly developed, mechanically strong ~10% Mg-substituted wollastonite (Ca_90%Mg_10%SiO₃; CSi-Mg10) were fabricated, implanted into the bone defects, and compared with implants made with the typical Ca-phosphate and Ca-silicate porous bioceramics, such as β-tricalcium phosphate (TCP), wollastonite (CaSiO₃; CSi), and bredigite (Bred). The initial physicochemical tests indicated that although the CSi-Mg10 scaffolds had the largest pore dimension, they had the lowest porosity mainly due to the significant linear shrinkage of the scaffolds during sintering. Compared with the sparingly dissolvable TCP scaffolds (~2% weight loss) and superfast dissolvable (in Tris buffer within 6 wk) pure CSi and Bred scaffolds (~12% and ~14% weight loss, respectively), the CSi-Mg10 exhibited a mild in vitro biodissolution and moderate weight loss of ~7%. In addition, the CSi-Mg10 scaffolds showed a considerable initial flexural strength (31 MPa) and maintained very high flexural resistance during soaking in Tris buffer. The in vivo results revealed that the CSi-Mg10 scaffolds have markedly higher osteogenic capability than those on the TCP, CSi, and Bred scaffolds after 16 wk. These results suggest a promising potential application of customized CSi-Mg10 3D robocast scaffolds in the clinic, especially for repair of alveolar bone defects.