Related Experiment Video

Updated: Feb 20, 2026

Crack Monitoring in Resonance Fatigue Testing of Welded Specimens Using Digital Image Correlation
05:30

Crack Monitoring in Resonance Fatigue Testing of Welded Specimens Using Digital Image Correlation

Published on: September 29, 2019

8.7K

Crack detection in riveted lap joints using fiber laser acoustic emission sensors

G A Cranch, L Johnson, M Algren

    Optics Express
    |October 19, 2017
    PubMed

    More Related Videos

    Mechanoluminescent Visualization of Crack Propagation for Joint Evaluation04:58

    Mechanoluminescent Visualization of Crack Propagation for Joint Evaluation

    Published on: January 6, 2023

    6.0K
    Optimized Sealing Process and Real-Time Monitoring of Glass-to-Metal Seal Structures04:41

    Optimized Sealing Process and Real-Time Monitoring of Glass-to-Metal Seal Structures

    Published on: September 2, 2019

    7.9K

    Related Concept Videos

    Microcracking in Concrete01:20

    Microcracking in Concrete

    Microcracking in concrete refers to the tiny cracks that can form within the material even before any external load is applied. These microcracks typically occur at the interface between the coarse aggregate and the hydrated cement paste, often as a result of differential volume changes prompted by variations in stress-strain behavior, as well as thermal and moisture movement. Initially, these microcracks remain stable and do not grow substantially until the concrete is stressed to about 30...
    504
    Types of Non-structural Cracks in Concrete01:28

    Types of Non-structural Cracks in Concrete

    Non-structural cracks are primarily of three types: plastic, early-age thermal, and drying shrinkage cracks. Plastic cracks are further classified into plastic shrinkage cracks and plastic settlement cracks.
    Plastic shrinkage cracks typically form within hours after the concrete is poured. The concrete's surface dries faster than the bottom, creating tensile stress that the still-plastic concrete cannot withstand, leading to diagonal or randomly patterned cracks on the concrete surface.
    531
    Lumber Defects01:23

    Lumber Defects

    Lumber defects, which can affect both the appearance and structural integrity of wood, include a variety of growth and manufacturing flaws. Growth defects such as knots and knotholes occur where branches were once attached to the tree trunk, with knotholes forming when these knots fall out. Other natural defects include decay and insect damage, which compromise the wood's strength and durability.
    Shakes are minor fractures that run along or across the wood's annual rings, while wane is...
    571
    Non-destructive Tests for Concrete Strength01:12

    Non-destructive Tests for Concrete Strength

    The rebound hammer test, also known as the Schmidt hammer test, is a non-destructive technique for evaluating the hardness of concrete and, indirectly, the strength of concrete. It operates on the principle that the rebound of a spring-driven mass from a concrete surface correlates to the surface's hardness. The device comprises a mass within a tubular housing, a spring mechanism, and a plunger that strikes the concrete. Upon release, the energy imparted to the mass by the spring causes it...
    628
    Fiber Reinforced Concrete01:22

    Fiber Reinforced Concrete

    Fiber-reinforced concrete significantly enhances the structural and nonstructural properties of traditional concrete by incorporating fibers like steel, glass, and polymers. These fibers, varying from natural ones such as sisal and cellulose to manufactured ones like polypropylene and Kevlar, are mixed into hydraulic cement with aggregates. Steel fibers, often preferred for their robustness, contribute to improved ductility, toughness, and post-cracking performance. The concrete is classified...
    437