Optimizing loop-type cryogenic modulation in comprehensive two-dimensional gas chromatography using time-variable
Guilherme L Alexandrino1, Gustavo R de Sousa1, Francisco de A M Reis1
1Institute of Chemistry, State University of Campinas, Cidade Universitária Zeferino Vaz, 13083-970 Campinas, SP, Brazil.
Abstract:
The enhanced chromatographic capability of the comprehensive two-dimensional gas chromatography (GC×GC) has already found several applications in analytical chemistry comprising complex samples. However, setting the appropriate chromatographic conditions that maximize sensitivity and separation efficiency in GC×GC may be more difficult than in conventional one-dimension gas chromatography, mainly due to the additional parameters strictly related to the modulation. Loop-type cryogenic modulators have been currently used for crude oil analysis using GC×GC, requiring sometimes a laborious try-and-error procedure to properly tune the dual-jets elapsed times on modulation. In this work, the advantages of choosing a time-variable combination of cold and hot jets pulses in a loop-type cryogenic modulator is presented when performing the fingerprinting analysis of crude oils using GC×GC-QMS, contrary to the conventional procedure based on a single combination for the dual-stage jets. A design of experiments approach is proposed to most effectively optimize the time-variable combination of the dual-jets elapsed times while modulating the wide hydrocarbons range along the GC×GC analysis. The most abundant classes of hydrocarbons contained in the maltenes fraction of a crude oil sample, such as paraffins, aromatics, steranes and hopanes were successfully resolved.
Related Concept Videos
Gas Chromatography: Sample Injection Systems
Two primary injection methods are used...
Gas Chromatography: Introduction
In GC, a sample is vaporized and mixed with an inert carrier gas (the mobile phase), which transports it through a...
Gas Chromatography–Mass Spectrometry (GC–MS)
A gas chromatograph consists of a long, narrow capillary column with a polysiloxane coating on the inner wall....
Gas Chromatography: Overview of Detectors
A non-destructive detector allows a sample to be analyzed without altering or consuming it, meaning the sample can be collected after detection for further analysis. Examples include thermal conductivity detectors and...
High-Performance Liquid Chromatography: Instrumentation
Gas Chromatography: Types of Detectors-II


