Related Experiment Video
Updated: Feb 18, 2026

Ultrasensitive Detection of Biomarkers by Using a Molecular Imprinting Based Capacitive Biosensor
Published on: February 16, 2018
Ultrasensitive electrochemical immunosensor for quantitative detection of HBeAg using Au@Pd/MoS2@MWCNTs nanocomposite
Zengqiang Gao1, Yueyun Li1, Xiaobo Zhang1
1School of Chemical Engineering, Shandong University of Technology, Zibo 255049, PR China.
Abstract:
A sensitive sandwich-type electrochemical immunosensor for the detection of hepatitis B e antigen (HBeAg) was successfully developed based on the gold@palladium nanoparticles (Au@Pd NPs) loaded by molybdenum disulfide functionalized multiwalled carbon nanotubes (Au@Pd/MoS2@MWCNTs). The resultant nanocomposites not only possessed high specific surface area and good biocompatibility, but also exhibited excellent electro-catalytical property. Au NPs functionalized porous graphene oxide (p-GO@Au) were used as sensing platforms and primary antibodies carriers, which can accelerate the electron transfer and improve the load capacity of primary antibodies (Ab1), improving the sensitivity of the immunosensor. Under optimal conditions, the designed immunosensor could detect target HBeAg concentration in the range from 0.1pg/mL to 500pg/mL, with a low detection limit of 26fg/mL (S/N = 3) for HBeAg. Additionally, the designed immunosensor showed excellent specificity, good reproducibility and acceptable stability. The satisfactory results in analysis of human serum samples indicated that it had potential application in clinical monitoring of tumor markers.

