[Investigation on stability and degradation kinetics of febrifugine]

To investigate the stability and degradation kinetics of febrifugine. The results showed that within 24 hours, febrifugine content was decreased by only 1% in mobile phase solvent, but its content was decreased to be 90% of the initial content in the water, methanol, 50% methanol and 10% acetonitrile solution. When the pH value of the solution was between 3 and 7, the retention rate of febrifugine in 24 hours was over 98%, but its content was decreased by about 12% in alkaline solution (pH 9.0). The higher the temperature, the worse the stability of febrifugine. At 40-80 ℃, the content of febrifugine was decreased to be 60% of its initial content in 10 hours, but the content was decreased by only 5% in 10 h at 20 ℃.However, no matter 40 ℃or 60 ℃, febrifugine was mainly transformed into isofebrifugine, and the total content of febrifugine and isofebrifugine was equal to their initial total content in 10 hours, while incase of 80 ℃, the total content was decreased to be 83.33% in 10 h, which suggested that the structure of febrifugine was absolutely changed, not just isomerized to be isofebrigugine at high temperature. Light had a significant impact on the stability of febrifugine. Under bright light, the content of febrifugine was reduced by about 23% in 108 h, but it only decreased by about 10% in the natural light or darkness. In artificial gastric fluid (pH 1.4) and artificial intestinal fluid (pH 6.8), the content of febrifugine was decreased by less than 5% in 10 h. After storage at high temperature(60 ℃), high humidity [(75±1)%] and strong light (3 000 lx) conditions for 10 d, the content of solid febrifugine was decreased by 0.27%, 7.6% and 5.39%, respectively. The degradation of febrifugine basically complied with the first-order reaction kinetic process in the following conditions: in water, methanol, 50%methanol and 10% acetonitrile solvents, alkaline solution (pH>7), different light intensity and different temperatures (20,40 ℃). Therefore, no matter the isolation and purification of febrifugine or the production of the related preparations, it should be done fast in the acidic solution, low temperature and dark conditions, while the febrifugine solid should be kept in dry and dark conditions.