Related Experiment Video
Updated: Feb 17, 2026

Medium Preparation for the Cultivation of Microorganisms under Strictly Anaerobic/Anoxic Conditions
Published on: August 15, 2019
Effect of different ammonia sources on aceticlastic and hydrogenotrophic methanogens
Hailin Tian1, Ioannis A Fotidis1, Konstantinos Kissas1
1Department of Environmental Engineering, Technical University of Denmark, Bygningstorvet Bygning 115, DK-2800 Kgs. Lyngby, Denmark.
Abstract:
Ammonium chloride (NH4Cl) was usually used as a model ammonia source to simulate ammonia inhibition during anaerobic digestion (AD) of nitrogen-rich feedstocks. However, ammonia in AD originates mainly from degradation of proteins, urea and nucleic acids, which is distinct from NH4Cl. Thus, in this study, the inhibitory effect of a "natural" ammonia source (urea) and NH4Cl, on four pure methanogenic strains (aceticlastic: Methanosarcina thermophila, Methanosarcina barkeri; hydrogenotrophic: Methanoculleus bourgensis, Methanoculleus thermophilus), was assessed under mesophilic (37 °C) and thermophilic (55 °C) conditions. The results showed that urea hydrolysis increased pH significantly to unsuitable levels for methanogenic growth, while NH4Cl had a negligible effect on pH. After adjusting initial pH to 7 and 8, urea was significantly stronger inhibitor with longer lag phases to methanogenesis compared to NH4Cl. Overall, urea seems to be more toxic on both aceticlastic and hydrogenotrophic methanogens compared to NH4Cl under the same total and free ammonia levels.
Related Concept Videos
Metabolism of Chemolithotrophs
Overview of Archaea
Titration of a Weak Acid with a Weak Base
As a result, there is no simple...
Brønsted-Lowry Acids and Bases
Diversity of Archaea I
Titration of a Weak Base with a Strong Acid
Using the ICE table and substituting the Kb value, we calculate the initial pH of 50 mL of 0.1 M ammonia to be 11.11. Addition of 25 mL of 0.1 M hydrochloric acid to this solution of ammonia results in a buffer with an equal concentration of ammonia and ammonium ions. The pH of this buffer can be calculated by substituting these...

