Related Experiment Video
Updated: Feb 15, 2026

Image-based Lagrangian Particle Tracking in Bed-load Experiments
Published on: July 20, 2017
Stoichiometric variation and loading capacity of a high-loading anammox attached film expanded bed (AAEEB) reactor
Yanlong Zhang1, Haiyuan Ma2, Rong Chen3
1College of the Environment & Ecology, Xiamen University, South Xiang'an Road, Xiang'an District, Xiamen, Fujian 361102, China; Department of Civil and Environmental Engineering, Graduate School of Engineering, Tohoku University, 6-6-06 Aoba, Aramaki, Aoba-ku, Sendai 980-8579, Japan.
Abstract:
The nitrogen loading rate (NLR) of an anammox attached film expanded bed (AAFEB) reactor was increased from 5.0 to 60.0 gN/L/d. During the stable operational period, the TN removal efficiency maintained at 87.3 ± 2.5%, and a maximum nitrogen removal rate (NRR) of 44.9 ± 0.3 gN/L/d was achieved. Overload resulted in the sharp deterioration of reactor performance, the ratio of (Food/Microorganism)/SAA should be maintained at lower than 66 ± 7% to ensure the stable operation of the AAFEB reactor. New stoichiometric equations for the anammox process under the low NLR condition (5.0 gN/L/d) and the high NLR condition (50.0 gN/L/d) were proposed. The quantitative SAA-cytochrome heme C relationship was established for the first time that providing a simple way for monitoring the reactor performance. Substrate tolerance ability was significantly increased that proving the stability of the AAFEB reactor was continuously enhanced during the stable operational periods.
Related Concept Videos
Impact Loading
In cases of elastic deformation,...
Distributed Loads
For example, consider a bookshelf filled with books stacked vertically adjacent to each other. The weight of the books is evenly distributed over the length of the shelf. As a result, the pressure at different locations on the surface of the...
Eccentric Loading
Load along a Single Axis
Consider a beam of length L subjected to a varying load, which is a combination of parabolic and trapezoidal load distribution along the x-axis. In this case, it is essential to determine the resultant loads, their locations, and...
Stress: General Loading Conditions
The shearing force, possessing potential directionality within the plane of the section, is simplified into two component forces running parallel to the x and y axes....
General Case of Eccentric Axial Loading
Consider a member subjected to equal and opposite forces that are applied along a line that does not coincide with the member's neutral axis. In unsymmetrical...

