Related Experiment Video
Updated: Feb 15, 2026

Design and Analysis of Temperature Preference Behavior and its Circadian Rhythm in Drosophila
Published on: January 13, 2014
The influence of solid retention time on IFAS-MBR systems: analysis of system behavior
Giorgio Mannina1, Marco Capodici1, Alida Cosenza1
1a Dipartimento di Ingegneria Civile, Ambientale, Aerospaziale, dei Materiali , Università di Palermo , Palermo , Italy.
Abstract:
A University of Cape Town Integrated Fixed-Film Activated Sludge Membrane Bioreactor (UCT-IFAS-MBR) pilot plant was operated at different values of the sludge retention time (SRT). Three SRTs were investigated at different durations: indefinitely, 30 and 15 days. The organic carbon, nitrogen and phosphorus removal, kinetic/stoichiometric parameters, membrane fouling tendency and sludge filtration properties were assessed. The findings showed that by decreasing the SRT, the pilot plant could maintain excellent carbon removal efficiencies throughout the experiments. In contrast, the biological carbon removal showed a slight nitrification and was slightly affected by the decrease of the SRT, showing high performance (approximately 91%, on average). Thus, the biofilm might have helped sustain the nitrification throughout the experiments. The average phosphorus removal performance increased slightly with a decrease in SRT, achieving the maximum efficiency (61.5%) at a SRT of 15 days. After a 30-day SRT, an increase in resistance due to pore blocking and a general worsening of the membrane filtration properties occurred.
Related Concept Videos
Structures of Solids
Timing and Consequences on Behavior
Humans, however, can respond to delayed reinforcers. We often make decisions between immediate small rewards and delayed larger rewards. This ability to delay gratification is a significant...
Linear time-invariant Systems
The input-output behavior of an LTI system can be fully defined by its response to an impulsive excitation at its input. Once this impulse response is known, the system's reaction to any other input can be...
Molecular and Ionic Solids
Molecular Solids
Molecular crystalline solids, such as ice, sucrose (table sugar), and iodine, are solids that are composed of neutral molecules as their constituent units. These molecules are held together by weak intermolecular forces such as London dispersion forces, dipole-dipole interactions, or hydrogen bonds, which...
Causes of Social Behavior III: Biological and Environmental Influences
Modified-Release Drug Delivery Systems: Influencing Factors

